3 MW Marine Fuel-Cell Hybrid Powertrain
Marine fuel-cell and battery modelling: vessel duty cycles, operating strategy, energy use and heat generation.
Marine fuel-cell and battery modelling: vessel duty cycles, operating strategy, energy use and heat generation.
Page not found. Your pixels are in another canvas.
Power electronics, open-source tools, and creative systems.
The mechanical-geometry agent of the AIPE framework: parametric FreeCAD models of transformers, cooling and converter assemblies with geometric checks, illustrated by a 10 kW DAB converter.
The finite-element agent of the AIPE framework: Gmsh and Elmer workflows for thermal and magnetic fields, illustrated by the heat sink of a 10 kW DAB converter, solved from the CAD Agent’s model.
The research-writing agent of the AIPE framework: evidence-linked paper plans and venue-specific IEEE manuscripts, illustrated by a paper plan for the 10 kW DAB benchmark.
The PCB design agent of the AIPE framework: from converter requirements to checked KiCad schematics and boards, illustrated by a 5 kW SiC buck converter.
The schematic agent of the AIPE framework: circuit descriptions to connectivity-checked SVG schematics, illustrated by a dual-active-bridge converter.
A modular bidirectional half-bridge converter linking battery banks to the DC bus of a laboratory microgrid.
Multi-objective converter design: the optimal design process, an integrated framework for loss, volume and cost, and a Pareto study of a 1 kW buck-type inverter.
A hierarchical control scheme for low-voltage DC microgrids: passive converter control, DC bus signalling and rule-based energy management.
The dual-window DC bus interacting method: working and signalling voltage windows for coordination of sources and storage.
A high-pass-filtered passive stabiliser that suppresses Boost converter oscillation in DC microgrids without shifting the bus voltage.
Rule-based power management for a DC microgrid: six-bit bus commands, two-level state machines, battery coordination and PV surplus limitation.
Double-pulse testing of power devices: the test circuit, a SiC MOSFET test platform and measurement campaign, and a purpose-designed GaN double-pulse test board.
An optimisation-based energy management system for DC microgrids that prices battery wear alongside grid electricity, so the battery can hold the bus voltage without excessive cycling.
A modular low-voltage DC microgrid with grid, PV and battery interfaces, built for PhD control experiments.
A modular low-voltage DC microgrid test bench and its successive interface-converter prototypes.
Low-voltage DC microgrid testbeds built at Aston and Loughborough, and a 50 kW test bench operated at Zhejiang University.
A 50 kW DC microgrid test bench at Zhejiang University: converter protection, hierarchical control with passivity-based stabilisation, and droop control of three-phase AC–DC interface converters.
Current capability of a packaged GaN power device, tracked through the junction temperature read from an on-chip sensing resistance.
Design and simulation of isolated DC–DC converters for data-centre power: LLC resonant and dual-active-bridge topologies.
Resonant-tank design and closed-loop simulation of a 10 kW, 750 V to 50 V LLC converter for data-centre power.
Microgrid energy management: a DC microgrid EMS considering battery degradation, the 3 MW marine fuel-cell powertrain and marine thermal evaluation.
Semiconductor modelling for power conversion, with a SiC static ANN model for conduction, switching energy and thermal response.
Non-isolated converters for DC microgrids: bidirectional battery interfaces and Boost-converter stabilisation.
A current transformer with a ferrite core embedded in the PCB and a secondary winding of traces and vias, sized with a design workbook for bandwidth, saturation and trace current.
A review of how the Rogowski coil developed and how PCB winding patterns trade off, and five PCB coil designs with on-board signal conditioning for fast current transients in power converters.
A modified MPPT algorithm that combines solar power tracking with battery charging limits in one converter controller.
Environmental and thermal reliability testing of SiC power modules and GaN devices.
Compact PCB-integrated current sensors for fast-switching power converters: a PCB Rogowski coil and an embedded-core PCB current transformer.
Neural-network models of SiC conduction, switching energy and thermal response for converter loss and temperature calculations.
Enclosure thermal modelling and ventilation behaviour across North Sea, Persian Gulf and Singapore climate scenarios.
A review of solid-state transformer technology for the ASSIST project, and the simulation-based design of the dual-active-bridge stage of a three-stage SST with Cardiff University.
Electrical and thermal characterization of SiC and GaN power devices: double-pulse testing, thermal resistance and impedance, and current capability.
Thermal resistance of a packaged GaN power device from an on-chip temperature-sensing resistance, and transient thermal impedance of a SiC MOSFET.
Wireless power transfer research for underwater applications and a postdoctoral prototype test bench.